Universal Safety Controller HUB™
Multiple Safety Devices...One Safety Controller!
Standard Features

Standard Features
• The Safety Controller HUB has 24 safety input terminals that can utilize safety or non-safety devices. (Expandable).
• The Safety HUB can monitor an input signal or provide 24 VDC when needed.
• Inputs can be NPN sinking/ground or PNP sourcing /+24VDC.
• Monitored mechanical captive contact safety relay outputs (dry) are built-in standard within the safety HUB.
• Monitored solid state outputs are built-in the safety HUB.
• Safety Channels A and B are both pulsed independently and sequentially to protect from component and internal shorts of 4 wire E-stop devices.
• No dip switches for inadvertent tampering of safety circuit, outputs or ancillary functions!
• No programming - Pinnacle Systems does everything for you!

Resets
• Fault reset button on Safety HUB Controller front panel.
• Manual relay reset button on Safety HUB Controller front panel.
• *Remote reset button – Uses any of the 24 safety inputs for remote reset away from the Controller HUB.

The Universal Safety Controller HUB has built-in field replaceable captive (dry) contact safety relays. This is quite advantageous when compared to regular safety relay modules that require the entire module to be discarded and replaced when a single internal mechanical relay goes bad. The Universal Safety Controller HUB is extremely cost efficient when compared to the total cost of using standard freestanding safety relays, their installation time and repair.

Communications: The Safety Controller HUB contains USB Port, CAN Network and optional Ethernet connections.

Control Reliable Control Systems
Control reliable resolver based (rotary and linear) position based systems available. Excellent for machine tools such as punch presses and press brakes (consult factory).