Model CE
Solid State Outputs Global
 Safety Light Curtain
Specs and Dimensions

 • Input Power: Emitter pylon: 24vdc @ .125A
Receiver pylon: 24vdc @ .125A (solid state outputs are PNP which may draw up to .25A additional)

• Internal fuses: Emiter Pylon: F1 @ 1A

Receiver Pylon: F1 @ 1A, F2 @ 1/2A, F3 @ 1/2A

• Outputs : Receiver pylon: monitored, 2 outputs, solid state PNP
(24vdc when GREEN, float when RED/off). Max .25A draw each.

• Indicators : Emitter pylon: Yellow, Red, Green.
Receiver pylon: Yellow, Red, Green.

• Construction : Painted aluminum extrusion with Acrylic IR lens and Viton Seals providing NEMA 4 (IP65) protection.
Cables are both 21’ (6.4m) long with a flexible in-line connector 12” (254mm) from the base of each pylon. (Shielded)

Emitter pylon: Four conductor 24AWG (Shielded)

Receiver pylon: Eight conductor 24AWG (Shielded)

Pylons: Yellow, with swivel mounting brackets

Cables: Black, shielded

• Temperature : 0 to 50c (up to 95% humidity, non-condensing)

• Safety Software: Tested to UL1998 and ISO 9001 standards

• Pylon Enclosures: Tested to IEC 60529

• EMC Testing to IEC 61000-4 standards

• Dimensions : 1.45" (36.8mm) x 1.95” (49.5mm)
• Beam Spacing & Minimum Object Sensitivity (MOS)
.5" (12.7mm) .55" (14mm) MOS
1" (25.4mm) 1.18" (30mm) MOS

Special Order:
4" (102mm) active area followed by a 4" (102mm) gap)
4" (102mm) active area followed by a 8" (204mm) gap)

• Response Time and Scanning Frequency:
< 30 mSec total, 10 khz

• Shock : Tested to withstand high vibration (using shock mounts)

• Self-Checking : Every 15mSec

• Scanning distance
From 1’ to 20’ standard (1-6m)
From 21’ to 35’ (6-10.7m) extended range (optional)
The range is stated as a two digit number within the Model #

• Specials : Custom designed light curtains for special applications.
Consult factory.

• Surface Mount Technology

• One Year Warranty

• Made in USA

 ***Model CE ouput circuits must be used with either "control reliable" PLC input circuits, or a safety module. ***

Pylons with Swivel Mounting Brackets

A. Guarded area (first to last beam)
B. Distance between mounting holes
C. Distance between mounting brackets
D. Total length (including brackets, but not cable)
Tolerance: +/- .10”/2.5mm