| Pinnacle Systems, Inc. - Safety Light Curtains, Safety Mat Systems and Ergonomic Palm Buttons |
| Page: STTS Trim Kits |
Trim Kits
|
Perimeter Trim Ordering
Procedure: Specify linear feet or
dimensions followed by one of the
following: |
|
Example: Part # 2442TK
A 24” x 42” mat with a 24” x 42”
picture frame trim kit; total area is 29” x
47”.
Active Coupler (Part #M003) is used whenever the mats are placed side to side or end to end. This will activate the "Active EdgingTM" feature which will eliminate dead zones between mats. The active coupler adds .25" (6.35mm) to the mat system’s overall dimension.
Ordering Procedure ­ Specify Part # and total length required in feet.
Built-In Wire Raceway (Part #M002). This innovative design concept provides excellent wiring protection for your safety mat system. The design provides an elevated off the floor wire raceway to protect the wiring and connections from fluids and caustic materials on the floor. It also provides a wiring harness to protect the mat wires from being pinched by improper perimeter trim installations commonly found in the industry.
The built-in raceway promotes individual homerun mat wiring back to the mat controller to ease installation and aid system troubleshooting diagnostics via the message display. The wire raceway provides enough space for six wire/plug assemblies to be run individually within the raceway back to the mat controller. The wire raceway component is supplied standard with the perimeter trim Part #M001.
ALL SAFETY MAT ASSEMBLIES ARE REQUIRED BY LAW TO BE "FIXED" IN PROPER LOCATION FOR MACHINE GUARDING APPLICATIONS.
Surface Metal
Raceway
Used to shield wire runs across the floor
between the perimeter trim and the mat
controller
|
Part Number |
Item |
Description |
|
M005 |
Base and Cover |
.040" (1mm) galvanized
steel. |
|
|
||
|
Part Number |
Item |
Description |
|
M006 |
Base and Cover |
Cover: .050" (1mm)
galvanized steel. |
|
|
||
Ordering Procedure: Specify
Part Number and total length required in feet.